| Safety Colors | ANSI/NEMA Z535.1 |
| Scheme for the Identification of Piping Systems | ASME A13.1 |
| Standard Terminology for Paint, Related Coatings, Materials, and Applications | ASTM D16 |
| Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces | ASTM D610 |
| Standard Test Method for Evaluating Degree of Checking of Exterior Paints | ASTM D660 |
| Standard Test Method for Evaluating Degree of Blistering of Paints | ASTM D714 |
| Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers | ASTM D1005 |
| Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting | ASTM D1730 |
| Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces | ASTM D2200 |
| Standard Test Method for Rubber Property—Durometer Hardness | ASTM D2240 |
| Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM D2583 |
| Standard Guide for Painting Inspectors (Metal Substrates) | ASTM D3276 |
| Standard Test Methods for Rating Adhesion by Tape Test | ASTM D3359 |
| Standard Test Method for Film Hardness by Pencil Test | ASTM D3363 |
| Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings | ASTM D3925 |
| Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means | ASTM D4138 |
| Standard Test Method for Viscosity by Dip-Type Viscosity Cups | ASTM D4212 |
| Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films | ASTM D4214 |
| Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | ASTM D4227 |
| Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces | ASTM D4228 |
| Standard Practice for Surface Cleaning Concrete for Coating | ASTM D4258 |
| Standard Practice for Abrading Concrete | ASTM D4259 |
| Standard Practice for Liquid and Gelled Acid Etching of Concrete | ASTM D4260 |
| Standard Practice for Surface Cleaning Concrete Masonry Units for Coating | ASTM D4261 |
| Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces | ASTM D4262 |
| Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method | ASTM D4263 |
| Standard Test Method for Indicating Oil or Water in Compressed Air | ASTM D4285 |
| Standard Practice for Measurement of Wet Film Thickness by Notch Gages | ASTM D4414 |
| Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel | ASTM D4417 |
| Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities | ASTM D4537 |
| Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities | ASTM D4538 |
| Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | ASTM D4541 |
| Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings | ASTM D4610 |
| Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub | ASTM D4752 |
| Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates | ASTM D4787 |
| Standard Guide for Sampling Chain-of-Custody Procedures | ASTM D4840 |
| Standard Test Method for Conductimetric Analysis of Water-Soluble Ionic Contamination of Blast Cleaning Abrasives | ASTM D4940 |
| Standard Practice for Field Identification of Coatings | ASTM D5043 |
| Standard Guide for Use of Certification of Coating Conformance Form | ASTM D5063 |
| Standard Practice for Conducting a Patch Test to Assess Coating Compatibility | ASTM D5064 |
| Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces | ASTM D5065 |
| Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates | ASTM D5162 |
| Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs | ASTM D5402 |
| Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals | ASTM D5702 |
| Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage | ASTM D6132 |
| Standard Practice for Sampling of Coating Films | ASTM D6206 |
| Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) | ASTM D6237 |
| Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting | ASTM D6386 |
| Standard Test Method for Evaluating Adhesion by Knife | ASTM D6677 |
| Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals | ASTM D7091 |
| Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument | ASTM D7127 |
| Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers | ASTM D7234 |
| Standard Practice for Indicating Oil in Abrasives | ASTM D7393 |
| Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting | ASTM D7396 |
| Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) | ASTM E337 |
| Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube | ASTM F1216 |
| Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) | ASTM F1743 |
| Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride | ASTM F1869 |
| Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes | ASTM F2170 |
| Standard Test Methods for Cathodic Disbonding of Pipeline Coatings | ASTM G8 |
| Standard Test Methods for Holiday Detection in Pipeline Coatings | ASTM G62 |
| Standard Terminology and Acronyms Relating to Corrosion | ASTM NACE / G193 |
| Surface Preparation Standard for Ductile Iron Pipe and Fittings In Exposed Locations Receiving Special External Coatings and/or Special Internal Linings | NAPF 500-03 |
| Drinking Water System Components – Health Effects | NSF/ANSI 61 |
| Guideline for Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete | ICRI 710.1 |
| Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repair | ICRI 310.2R |
| Guidance on the estimation of the probability of condensation prior to paint application | ISO 8502-4 |
| Preparation of Protective Coating Specifications for Atmospheric Service | NACE 80200/SSPC-TR 4 |
| Corrosion Prevention and Control Planning | NACE SP21412/SSPC-CPC 1 |
| White Metal Blast Cleaning | NACE No. 1/SSPC-SP 5 |
| Near-White Metal Blast Cleaning | NACE No. 2/SSPC-SP 10 |
| Commercial Blast Cleaning | NACE No. 3/SSPC-SP 6 |
| Brush-Off Blast Cleaning | NACE No. 4/SSPC-SP 7 |
| Surface Preparation of Concrete | NACE No. 6/SSPC-SP 13 |
| Corrosion Management of Atmospherically Exposed Reinforced Concrete Structures | NACE SP0112 |
| Design-Fabrication-and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service | NACE SP0178 |
| Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates | NACE SP0188 |
| Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape | NACE SP0287 |
| Inspection of Lining Application in Steel and Concrete Equipment | NACE SP0288 |
| Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures | NACE SP0390 |
| Soluble Salt Testing Frequency and Locations on Previously Coated Surfaces | NACE SP0716 |
| Coatings and Linings over Concrete for Chemical Immersion and Containment Service | NACE SP0892 |
| Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete | NACE 02203/ICRI Technical Guideline 03741/SSPC-TR 5 |
| Preparation of Protective Coating Specifications for Atmospheric Service | NACE 80200/SSPC-TR 4 |
| Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing | NACE TM0185 |
| Application, Performance, and Quality Control of Plant-Applied Single Layer Fusion-Bonded Epoxy External Pipe Coating” | NACE SP0394 |
| Corrosion Control of Underground Storage Tank Systems by Cathodic Protection” | NACE SP0285 |
| Application of a Coating System to Interior Surfaces of Covered Steel Hopper Railcars in Plastic, Food, and Chemical Service | NACE SP0386 |
| Application of a Coating System to Exterior Surfaces of Steel Rail Cars | NACE RP0692 |
| Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service | NACE SP0592 |
| Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars | NACE SP0295 |
| Thermal Precleaning | NACE 6G194/SSPC-SP-TR 1 |
| A State-of-the-Art Report on Protective Coatings for Mitigating Corrosion Under Insulation on Rail Tank Cars | NACE 14C296 |
| Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries | NACE RP0495 |
| Application of a Coating System to Interior Surfaces of Covered Steel Hopper Railcars in Plastic, Food, and Chemical Service | NACE SP0386 |
| Detection of Internal Tubular Coatings of Less Than 250 μm (10 mils) Dry-Film Thickness | NACE TM0384 |
| Application of Cathodic Protection for External Surfaces of Steel Well Casings | NACE SP0186 |
| Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 10 to 30 mil | NACE SP0490 |
| Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures | NACE RP0281 |
| Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service | NACE TM0174 |
| Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment | NACE TM0183 |
| Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing | NACE TM0185 |
| Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production | NACE SP0176 |
| Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment | NACE SP0181 |
| Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection | NACE SP0487 |
| Mineral and Slag Abrasives | SSPC-AB 1 |
| Cleanliness of Recycled Ferrous Metallic Abrasives | SSPC-AB 2 |
| Guide to Developing a Corporate Safety Program for Industrial Painting and Coating Contractors | SSPC-Guide 17 |
| Guide for Applying Thick Film Coatings and Surfacings Over Concrete Floors (replaces SSPC-TU 10 of same title) | SSPC-Guide 20 |
| Shop-Field and Maintenance Painting of Steel | SSPC-PA 1 |
| Procedure for Determining Conformance to Dry Coating Thickness Requirements | SSPC-PA 2 |
| Guide to Maintenance Coating of Steel Structures in Atmospheric Service | SSPC-PA 5 |
| Applying Thin Film Coatings to Concrete | SSPC-PA 7 |
| Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels | SSPC-PA 8/NACE No. 11 |
| Measurement of Dry Coating Thickness Using Ultrasonic Gages | SSPC-PA 9 |
| Procedure for Determining Conformance to Steel Profile/Surface Roughness/Peak Count Requirements | SSPC-PA 17 |
| Commentary on Coating Application | SSPC-PA COM |
| Guide to Safety and Health Requirements for Industrial Painting Projects | SSPC-PA Guide 10 |
| Protecting Edges, Crevices, and Irregular Steel Surfaces by Stripe Coating | SSPC-PA Guide 11 |
| Liquid-Applied Organic Polymeric Coatings and Linings for Concrete Structures in Municipal Wastewater Facilities, Performance-Based | SSPC-Paint 44 |
| Solvent Cleaning | SSPC-SP 1 |
| Hand Tool Cleaning | SSPC-SP 2 |
| Power Tool Cleaning | SSPC-SP 3 |
| Power Tool Cleaning to Bare Metal | SSPC-SP 11 |
| Commercial Grade Power-Tool Cleaning | SSPC-SP 15 |
| Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals | SSPC-SP 16 |
| Surface Preparation Commentary for Metal Substrates | SSPC-SP COM |
| Surface Tolerant Coatings for Steel | SSPC-SSPC-TU 1 |
| Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment | SSPC-SSPC-TU 2/NACE 6G197 |
| Preparation of Protective Coating Specifications for Atmospheric Service | SSPC-SSPC-TR 4/NACE 80200 |
| Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete | SSPC-SSPC-TR 5/ICRI Technical Guideline 03741/NACE 02203 |
| Overcoating Existing Coating Systems Applied To Steel Substrates | SSPC-TU 3 |
| Estimating Costs for Protective Coatings Projects | SSPC-TU 9 |
| Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning | SSPC-VIS 1 |
| Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces | SSPC-VIS 2 |
| Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning | SSPC-VIS 3 |
| Guide for Planning Coatings Inspection | SSPC |
